This is the mobile app for the JO1 OFFICIAL LIGHT STICK.[MAIN FEATURES]1. CONCERT MODEPair your light stick with your concert seat information to enjoy various light stick performance during the concert.This menu will only be available during the concert period.2. CONNECTING TO BLUETOOTH ON YOUR SMARTPHONEPress the button on the light stick for 3 seconds to set up the “Bluetooth mode”.Turn on the Bluetooth function of your smartphone and hold your smartphone close to the light stick to sync them together.Some smartphones require the GPS function to be turned on to enable Bluetooth connectivity.If you cannot connect to Bluetooth, please turn on the GPS function.3. SELF MODEWhen your light stick is successfully connected to your smartphone, changing the color on the color wheel of the app will change your light stick color accordingly.4. BATTERY LEVEL CHECKIn the “SELF MODE” page of the app, click the “Check Battery Status” button at the bottom of the screen to check the battery level of your light stick and replace the battery if needed. ※ This function may differ ​​depending on battery performance and smartphone model.[NOTICE BEFORE CONCERT]- Check the seat information on your ticket before the concert and enter it into your light stick using the app.- To take part in the light stick performance, be sure to set the light stick to “Concert mode” by pressing its button for 3 seconds after pairing it with your seat information on the app.- If the light stick’s wireless performance does not work properly, it may be due to unsuccessful pairing or not completing the pairing process. Please complete the pairing process using the app.- Please be seated in the same seat you registered for your light stick. Moving to another seat may result in different light stick performance.- Check the battery level of your light stick in advance to ensure battery sufficiency during the concert.- There will be a Wireless Control Fanlight Support Center located at the venue.[REQUIRED ACCESS]To use the app and the light stick, the following accesses are required.※ To grant access, please tap the [Allow] button when the pop-up appears.- DEVICE STORAGE: To store the QR/barcode, seat information, etc.- PHONE: To read the phone status and its identity - CAMERA: To read the QR/barcode- GPS: To connect to Bluetooth- BLUETOOTH: To connect the light stickWhat's New in the Latest Version 2.0.2Last updated on Oct 10, 2023API Level UpdateTranslation Loading...